Radish Trial 1 Installation Step By Step Guide
- 1 Folder Structure
- 2 Installing the Game
- 3 Uncooking
- 4 Installing the Radish Tools
- 5 The template project
Downloading and installing all the tools as well as their dependencies can create a mess if they're left lying around haphazardly, therefore it's strongly recommend to draw up a well-structured folder hierarchy beforehand.
Tip: Place your root folder for modding as close to the base directory of your disk as possible (C:\, H:\, G:\ etc.) and avoid any special characters.
Both special characters and directory names above 256 chars can and will cause serious errors when trying to run the tools.
In the tutorial, the following basic structure will be referred to (the paths need to be adjusted to your specific folder structure accordingly):
|Game installation||H:\Witcher 3\_game||shared for all your mod projects|
|External tools||H:\Witcher 3\_modTools||shared for all your mod projects|
|Mod projects||H:\Witcher 3\_projects|
|Download||H:\Witcher 3\downloads||for convenience's sake|
Note that (sub)folders may need to be added to this structure later on in this guide. This is simply the basic structure.
Installing the Game
- Always use a completely fresh install for modding. For this guide, we'll be starting from scratch and start with installing the game.
- An English game installation is required. The Radish suite does not natively support other languages. Attempting it will lead to broken quest names/descriptions etc.
- If you want to play the game while modding it concurrently, using two separate builds is advisable. As the game is DRM-free, one can simply copy everything to a different directory.
Install the game into your chosen directory (easy enough).
GOG will install your game to
<Game installation>\The Witcher 3 Wild Hunt GOTY by default. This subdivision is not to my liking, so I am going to move the files one directory up, to my game installation folder. This step is optional, but keep it in mind for the future paths, should you not follow.
_game folder looks like this right now. If you use Steam, you will have a different layout.
For many of the tools used, it's necessary to enable debugging scripts for in-game data to be dumped for further use.
To achieve this, the
-debugscripts launch argument needs to be added to the shortcut.
Right click on the shortcut, select Properties, and add the command as shown below:
Now that we have a clean install of The Witcher 3 Wild Hunt. we can proceed to what's called "uncooking" the game files. This decodes the game files and makes them usable for modding purposes. There are 2 ways of uncooking the games files, a short one and a longer one.
Tip: Doing both is advised. People have been known to have problems because neither method is exclusively reliable. Save yourself some troubleshooting later on and use both methods from the get-go.
For some mods (usually relatively bigger ones), it can be necessary to uncook some additional files (e.g. shadow meshes). It will be covered in this guide for completion purposes, but is fully optional for basic quests.
The modus operandi
Several tools are needed to uncook the game files, including wcc_lite, Radish and QuickBMS.
The Official Witcher 3 ModKit (wcc_lite)
It can be found here: https://www.nexusmods.com/witcher3/mods/3173?tab=files&file_id=21542
After downloading, extract setup.exe and execute it. It will automatically install into C:\Program Files (x86)\Witcher 3 Mod Tools. That's not necessarily the directory we want it in. To have all the tools together, move the folder Witcher 3 Mod Tools into your <'External tools> folder (see table above for my absolute path).
My _modTools\Witcher 3 Mod Tools folder:
Now that the modkit installed, it needs to be patched. By default the application is absurdly slow, but this can thankfully be worked around.
The patch can be found here: https://forums.cdprojektred.com/index.php?threads/patched-wcc_lite-for-faster-startup.6883680/. Download the file and overwrite wcc_lite.exe, which is located in <'External tools>\Witcher 3 Mod Tools\bin\x64\.
Next, download the wcc_lite GUI for easier use, as the CLI of wcc_lite can be daunting, to say the least.
The UI can be found here: https://www.nexusmods.com/witcher3/mods/3332?tab=files&file_id=22973
Download it and place it in your <'External tools>\Witcher 3 Mod Tools folder.
Upon the first start-up, you will be prompted to locate your installation of wcc_lite.
Just follow the above-mentioned path and select it.
The second way of uncooking your game requires QuickBMS together with a preset from the Radish tools Nexus page.
The program can be acquired from here: https://aluigi.altervista.org/quickbms.htm
Create a new folder named QuickBMS in your <'External tools> path and extract all the files from the downloaded archive here.
Next, download the Radish QuickBMS uncook script. It can be found here: https://www.nexusmods.com/witcher3/mods/3620?tab=files&file_id=25205.
Extract all the files to your QuickBMS folder, as well.
To set up QuickBMS, open up the .bat file called radish.uncook and adjust the two paths in accordance with your specific directories. The first path SET W3_DIR = D:\The Witcher 3 Wild Hunt becomes SET W3_DIR = H:\Witcher 3\_game.
The uncooked files will be copied to the second path. This is just a temporary directory, so it's not important what it's set to. If you intend to keep the uncooked data, a new folder path must be created:
|Uncooked Game Files||H:\Witcher 3\_uncooked|
This folder will contain all uncooked game files from all sources.
Tip: The complete uncooked game data can take up to >100 GB of disk space, so if storage is an issue, keeping the uncooked game data permanently isn't necessary.
The second path SET OUTPUT_DIR = D:\tmp\qbms.all thus becomes SET OUTPUT_DIR=H:\Witcher 3\_uncooked\QuickBMS.
The Radish Tools
The next step is to download the external (non-ingame) part of the Radish suite, including all the encoders.
Extract the radish-tools folder into your <External tools>\Witcher 3 Mod Tools. This path more for personal taste than for functionality.
My <External tools>\Witcher 3 Mod Tools folder (_modTools\Witcher 3 Mod Tools now):
The uncooking process itself
Warning: As mentioned above, uncooking all the files requires a minimum disk space of 100 GB. Ensure there is enough.
To uncook the game files via wcc_lite (the long way), open up the GUI.
On the left hand side is found a command called uncook.
After ticking it, the following image should be seen:
A lot of parameters can be found on the right. Most of them aren't important.
The parameters indir and outdir are what matter here. These must be filled in as below:
|indir||<Game installation>\content||H:\Witcher 3\_game\content|
|outdir||<Uncooked game files>\Wcc||H:\Witcher 3\_uncooked\Wcc|
After filling in the params, hit Run Command in the upper right corner.
Warning: This process is slow: it takes a few hours even on modern NVMe SSDs, so be prepared to leave it running.
The wcc GUI should now look like this:
Your <Uncooked data>Wcc should now look like this:
As you might have noticed, the folder structure of this path looks similar to <External tools>\Witcher 3 Mod Tools\r4data.
When the uncooking is finished, We want to copy all the files from our [Uncooked Game Files]\Wccinto this folder.
Warning: Do not override any files in <'External tools>\Witcher 3 Mod Tools\r4data, when asked to, as they contain additional information. This process can also take some time, especially on HDDs, so be prepared for that.
Uncooking via QuickBMS is more straightforward, as the paths have already been set up in advance.
To uncook the files, simply run the edited radish.uncook.bat.
When the tool is finished, the CMD window should look like this:
Executing this tool won't take nearly as much time as wcc, but will still take a few minutes.
Upon completion, locate your <Uncooked game files>\QuickBMS folder and copy all the data to your <External tools>\Witcher 3 Mod Tools\r4data directory as well.
Warning: Again, do not override any files in <'External tools>\Witcher 3 Mod Tools\r4data when prompted, as they contain additional necessary data.
Some additional files
Besides the uncooked game files, the Radish suite uses some other files as well.
These can be found here: https://www.nexusmods.com/witcher3/mods/3620?tab=files&file_id=25206
After downloading, extract the scripts folder to your r4data folder.
To summarize: The game files have been uncooked via wcc_lite and QuickBMS, copied into <External tools>\Witcher 3 Mod Tools\r4data and the additional scripts folder provided by the Radish Nexus page has been installed.
Uncooking additional meshes (optional) (example: shadowmeshes)
For bigger projects with a lot of custom meshes (e.g a new hub), it may be necessary to extract further files; for example, uncooking shadwomeshes for shadows in custom environments to be displayed correctly.
Navigate to <External tools>\Witcher 3 Mod Tools\radish-tools\repo.shadowmeshes. If the tools are installed correctly, there should exist an uncook.meshes.bat file. Open it up in a text editor and set the appropriate paths to our game directory, the modkit and the Radish suite. DIR_MODKIT is the main directory of the Official TW3 ModKit and DIR_ENCODER is the directory where all Radish encoders can be found.
My uncook.meshes.bat file:
Tip: If a path with parentheses () in it is used, you have to offset/reformat them with a ^ (see comment in file).
The following error may occur:
If that happens, at least one shadowmesh hasn't been patched successfully. This can lead to errors in your mod, but there's currently no easy workaround.
Installing the Radish Tools
After all the necessary game files are uncooked, we can start to install all the latest in-game mods, as well as its requirements.
The first mod we are going to install is the Community Patch - Base Mod.
You can find it here: https://www.nexusmods.com/witcher3/mods/3652?tab=files&file_id=24139
After downloading the archive, extract the folders mods and content into your [Game Installation] directory and overwrite if prompted.. Done!
Next mod we are going to need is Community Patch - Bootstrap and Utilities Mod.
The installation here is a bit more complicated.
First we are going to choose a base version of the mod. There are 2 different files to choose from:
1) You have no custom map changing mods installed (recommended for modding the game): https://www.nexusmods.com/witcher3/mods/2109?tab=files&file_id=23947
2) You have a custom map mod (e.g. All Quest Objectives On Map or Colored Map Markers): https://www.nexusmods.com/witcher3/mods/2109?tab=files&file_id=24145
After downloading either the first or the second archive, extract the dlc and mods folder into your [Game Installation] directory.
Warning: Make sure you only install one of the two versions!
Next step is to download the bootstrap registry.
It can be found here: https://www.nexusmods.com/witcher3/mods/2109?tab=files&file_id=23946
In this archive you will only find a mods folder; copy it into your [Game Installation] directory... Done! ... Almost ;-)
To make this mod usable, we will also need to add the content of [Game Installation]\mods\modBootstrap\modBootstrap.input.settings to our Witcher 3 input settings.
We achive that by locating our W3 input file (commonly: C:\Users\[Your User]\Documents\The Witcher 3\input.settings) and pasting the content to the bottom of the file.
After pasting the content, my input.settings looks like this:
Now the Community Patch - Bootstrap and Utilities Mod should finally be installed correctly.
Next we need Community Patch - Shared Imports.
Just download the archive here: https://www.nexusmods.com/witcher3/mods/2110?tab=files&file_id=27873
and (again -.-) extract the mods folder to your [Game Installation] directory.
The Radish Bundle
Our next step is to download the Radish Ingame Bundle.
You can get it here: https://www.nexusmods.com/witcher3/mods/3620?tab=files&file_id=31079
Extract both the dlc and the mods folder into your [Game Installation] directory and overwrite any files, when prompted.
Next you need to paste the content of all the *.input.settings files from the archive into your W3 input (see above).
We're coming closer now! :-)
Next we are going to register our mods, so that we can load them in-game.
Therefor, we need to locate our mods_registry.ws. The file is located at [Game Installation]\mods\modBootstrap-registry\content\scripts\local\mods_registry.ws.
You can edit it with any text editor of your choice. Now we are going to add:
somewhere in the function createMods().
My mods_registry.ws looks like this:
The template project
Now, that all the necessary tools (including their requirements) are installed, we're going to have a closer look at the template project.
You can download it here: https://www.nexusmods.com/witcher3/mods/3620?tab=files&file_id=31076
Extract it and copy it into your [Projects] folder.
The most important file for now is the _settings_.bat located in [Projects]\modHubTest.
Edit it with a text editor of choice.
First of all we need to change paths again.
The paths are exactly the same, as when uncooking the shadow meshes:
1) Game Installation
2) The official Modkit
3) Path where the Radish Encoders are located
My _settings_.bat file:
After adjusting the paths correctly, we further have to remove SET RELEASE_VERSION=YES (Line 21) by making it a comment.
This setting will hinder any source information of this mod to be seen in-game. That's not what we want.
After editing the _settings_.bat file, we need to create junction links.
Fortunately, this is made pretty easy. We just need to start the _createLinks_.bat once and confirm by typing y (yes: english), j (ja: german), etc...
Tip: Both errors at the top can be ignored.
Now the template-project should be launchable.
You can build the test mod by starting full.rebuild.bat.